SLC - 氮气弹簧导轨提升器附件质量

SLC Part Inputs

Part Number:

Rod End Tap:

Stroke (S):

Mount:

B34 - Keyed Narrow Flange Mount

Operating Pressure:

Per Unit Force On-Contact:

Flow Fitting:

Dimensions

Press Inputs

Pad Mass:

Ram velocity at extension:

Enter Velocity

Calculate Velocity

Strokes Per Minute:

Stroke Travel (crank):

Pad Travel:

Velocity:

Calculated Load Attachments

Max Attachment Mass/Unit

Qty Recommended/Pad

* For optimal printing, go to print settings and change the margins to default and the scale to 50%. Part number denotes model and force based on DADCO product details and operating specifications. Refer to OEM standard for specific part number and operating guidelines. The calculated values are estimates for current revision DADCO products based on normal operating conditions. Calculations provided may differ from product literature recommendations based on rounding. Excess side loading forces, contamination, misalignment and other die construction factors may increase operating temperature. Attachment mass assumes balance load and actuation force. Do not exceed the ram velocity per lifter. This SOFTWARE is distributed for your convenience, but without any warranty. DADCO makes every effort to present accurate and reliable information and reserves the right to make changes without notification. Reliance upon or use of the SOFTWARE or any of its outputs are at your own risk. With use of this SOFTWARE in no event shall DADCO be liable for any direct, indirect, incidental, punitive, or consequential damages. ©DADCO, Inc. 2023 ● All Rights Reserved

Calculating options...

SLC - 氮气弹簧导轨提升器附件质量

在全球范围内找到我们